Burnt Iron? – There Are Ways!

Having trouble ironing clothes and bedding because the bottom of the iron sticks to the fabrics? Indeed, a burnt iron is not suitable for removing creases from clothes without the risk of burning holes in them. Certainly, the metal base of your device has accumulated remnants of various fabrics and particles that significantly impede ironing.

Although your iron looks clean at first glance, it is worth cleaning it from time to time to prevent build-up of unsightly and obstructive deposits. Remember that a burnt iron does not work properly and extends the ironing time, and also contributes to the weakening of fabric fibers.

The lack of systematic cleaning of the iron leads to a significant reduction in the life of the device due to the accumulation of small fragments of fabrics, dust and other particles from the environment. Ironing light colored clothes with a burnt iron is also associated with the risk of unsightly dark stains, which are often very difficult to remove.

Meet today with us some proven home ways to clean the iron – not only burnt. Regular maintenance will help you extend the life of your equipment and will perfectly take care of the condition of your clothes and other frequently ironed fabrics. Do not risk and take better care of your iron!

Burned iron? – Never again!

The iron is one of the most used household appliances and at the same time the most neglected. Although many of us iron our clothes almost every day, it often doesn’t even cross our mind that we should clean this device regularly.

Remember that all equipment requires proper care and maintenance. Otherwise, they will serve us for a short time and the results will not be satisfactory.

How many times during ironing have you had the impression that the iron is sticking to the fabric and you tremble about your favorite clothes so as not to burn a hole in them? It has certainly happened to you many times. Clean your slightly burnt iron before the next ironing and feel the difference! Below are some home tricks for quick and cheap cleaning!

1. Lemon juice with the addition of baking soda

If you are a fan of cleaning your home with natural cleaners, you certainly know that lemon juice and baking soda paste is one of the strongest and most effective household detergents.

This paste is also perfect for cleaning the metal base of the iron. It contains a lot of acids that quickly and efficiently detach fabric fragments adhering to the iron and remove all kinds of dirt.

Your burnt iron will look like new in a few moments, and its metal base – shiny and perfectly smooth!

Detergent ingredients

• The juice of two lemons
• 2 tablespoons of baking soda (30 g)

Method of preparation and use

• Squeeze the juice of two lemons and mix it with two tablespoons of baking soda.
• Wait a moment for the effervescent effect of mixing the two ingredients together to pass, and then rub the paste onto the cold base of the iron.
• Leave the paste on the metal part for about 5 minutes, then remove it thoroughly with a damp cloth.
• Clean the iron at least once a month.

2. Distilled water with white vinegar

Detergent ingredients

• ½ cup of distilled water (125 ml)
• ½ cup of white vinegar (125 ml)

Method of preparation and use

• Prepare a small dish and combine both ingredients in it. Make sure they connect well with each other.
• Then dip a clean cloth in the prepared solution and use it to wipe the burnt iron base. During cleaning, the iron should be slightly warm (lukewarm).
• Repeat cleaning 2-3 times a week. Thanks to this method, your iron will always be perfectly clean and safe for ironed fabrics, even the most delicate ones.

3. Table salt

Few of us know that table salt is an excellent cleaning agent. We can also successfully use it to remove burns from the base of the iron. Salt, thanks to the form of crystals, quickly and effectively removes fabric remnants and dirt from the iron.

How to clean a burnt iron with salt?

• Prepare two tablespoons of coarse salt (30 g) and one sheet of newspaper.
• Spread a newspaper and sprinkle salt crystals on the sheet.
• Then heat the iron and run it over the prepared surface as if you were ironing some fabric instead of a salt-sprinkled newspaper.
• Do this until the burnt iron is perfectly clean and its base is smooth and shiny.
• Finally, turn off the iron and wipe it with a soft cloth when it cools down.

4. Wax candle

Rubbing a wax candle into the base of the iron fantastically removes dirt and burns from the metal sheet that accumulate on it during each ironing.

The wax candle is characterized by a slippery texture that quickly and effectively softens deposits from a burnt iron and makes it look like new and work flawlessly again.

How to clean a burnt iron with a wax candle?

• Heat the iron a little and start rubbing a wax candle into its base. Leave the thin coating on the base of the device for a few minutes (until it cools down a little), then remove it with a soft cloth.
• If the burnt on dirt is extremely stubborn, repeat the procedure until the dirt is completely removed.

5. Toothpaste

Did you know that it is great at removing dirt from metal objects? Hence, it is often used to clean a burnt iron. It removes dirt from the metal base and restores its smoothness and shine.

How to clean a burnt iron with toothpaste?

• Put a small amount of toothpaste on the cold base of the iron. Then rub it with a clean cloth over the entire metal surface of the soleplate.
• The next step is to turn on the iron and activate the steam for several minutes in a row. Wait a few minutes.
• Finally, once again wipe the burnt iron with a cloth and wipe off all dirt and sticky fragments of fabrics from it.

Now you know that the iron needs to be cleaned regularly. The above methods are completely safe for your device. Thanks to proper care and regular cleaning, the iron will serve you for many years, and your clothes and bedding will not be exposed to damage to fibers or burning.